Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization incubated for 30 mins and measured for 15 mins by fluorometry methodAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization incubated for 30 mins and measured for 15 mins by fluorometry method
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization incubated for 30 mins and measured for 15 mins by fluorometry methodAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization incubated for 30 mins and measured for 15 mins by fluorometry method
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assayAgonist activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay
Agonist activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assayAgonist activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293-A cells assessed as ERK phosphorylation level incubated for 5 mins by ELISA assayAgonist activity at human FPR1 expressed in HEK293-A cells assessed as ERK phosphorylation level incubated for 5 mins by ELISA assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilizationAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilizationAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilizationAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilizationAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization incubated for 30 mins by Fluo4AM dye based scanning fluorimetric analysisAgonist activity at human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization incubated for 30 mins by Fluo4AM dye based scanning fluorimetric analysis
Agonist activity at human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization incubated for 30 mins by Fluo4AM dye based scanning fluorimetric analysisAgonist activity at human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization incubated for 30 mins by Fluo4AM dye based scanning fluorimetric analysis
Agonist activity at human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization incubated for 30 mins by Fluo4AM dye based scanning fluorimetric analysisAgonist activity at human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization incubated for 30 mins by Fluo4AM dye based scanning fluorimetric analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) expressed in CHO cells by cAMP assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonist activity at human FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assayAgonist activity at human FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assay
Agonist activity at human FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assayAgonist activity at human FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assay
Agonist activity at human FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assayAgonist activity at human FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assay
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at mouse FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assayAgonist activity at mouse FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assay
Agonist activity at mouse FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assayAgonist activity at mouse FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assay
Agonist activity at mouse FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assayAgonist activity at mouse FPR1 expressed in CHO cells assessed as reduction cAMP accumulation incubated for 1 hr by TR-FRET assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells assessed as increase in calcium mobilization by Fluo-4AM dye based assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assayAgonist activity at FPR1 (unknown origin) transfected in CHO cells by cAMP assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assayAgonist activity at human FPR1 overexpressing CHO cells assessed as reduction in intracellular cAMP level incubated for 30 mins by HTRF assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysisAgonist activity at human FPR1 expressed in HL-60 cells assessed as increase in calcium mobilization by FLIPR analysis
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assayAgonist activity at human FPR1 expressed in HEK293 cells assessed as increase in calcium mobilization by Fluo-4 AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 in human neutrophiles assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Agonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophilsAgonistic activity was determined by measuring the ability to induce superoxide production(as measured by reduction of cytochrome C) using human neutrophils
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAgonist activity at human FPR1 transfected in human HL-60 cells assessed as increase in calcium mobilization measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Agonist activity at FPR1 (unknown origin) in CHO cells assessed as activation of p-ERK1/2 at 3.1 to 25 uM incubated for 30 mins by immunoblot analysisAgonist activity at FPR1 (unknown origin) in CHO cells assessed as activation of p-ERK1/2 at 3.1 to 25 uM incubated for 30 mins by immunoblot analysis
Agonist activity at FPR1 (unknown origin) in CHO cells assessed as activation of p-ERK1/2 at 3.1 to 25 uM incubated for 30 mins by immunoblot analysisAgonist activity at FPR1 (unknown origin) in CHO cells assessed as activation of p-ERK1/2 at 3.1 to 25 uM incubated for 30 mins by immunoblot analysis
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric methodAgonist activity at human FPR1 expressed in human HL60 cells assessed as induction of calcium mobilization measured every 5 secs for 240 secs by Fluo-4-AM dye based fluorometric method
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assayAgonist activity at human FPR1 transfected in human HL60 cells assessed as stimulation of Ca2+ influx measured every 5 secs for 240 secs by FLIPR assay
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilizationAgonist activity at FPR1 (unknown origin) transfected in human HL60 cells assessed as induction of Ca2+ mobilization
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Agonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assayAgonist activity at FPR1 expressed in human HL60 cells assessed as induction of intracellular calcium flux by FLIPR3 calcium assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as intracellular calcium mobilization by Fluo-4-AM dye based fluorescence assay
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assayAntagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assay
Antagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assayAntagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assay
Antagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assayAntagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at mouse FPR1 expressed in HEK293 cells assessed as inhibition of fMLFF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at mouse FPR1 expressed in HEK293 cells assessed as inhibition of fMLFF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at mouse FPR1 expressed in HEK293 cells assessed as inhibition of fMLFF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at mouse FPR1 expressed in HEK293 cells assessed as inhibition of fMLFF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at mouse FPR1 expressed in HEK293 cells assessed as inhibition of fMLFF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at mouse FPR1 expressed in HEK293 cells assessed as inhibition of fMLFF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assayAntagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assay
Antagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assayAntagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assay
Antagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assayAntagonist activity at human FPR1 in expressed in HEK293 cells assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation after 5 mins by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 in human neutrophils assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated degranulation after 15 mins by fluorescence assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of fMLP-induced calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assayAntagonist activity at human FPR1 transfected in human HL-60 cells assessed as inhibition of fMLF-induced intracellular calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5 seconds for 240 secs by Fluo-4-AM dye based fluorescence assay
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 30 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assay
Antagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assayAntagonist activity at FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated calcium mobilization by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Antagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophilsAntagonistic activity was determined by measuring the ability to inhibit superoxide production (stimulated by fMLF) using human neutrophils
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometryAntagonist activity against FPR1 (unknown origin) transfected in human HL60 cells assessed as calcium mobilization preincubated for 30 mins followed by fMLF addition and measured for 5 sec for 240 sec by fluorometry
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Antagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assayAntagonist activity at human recombinant FPR1 in expressed in HEK293 cells assessed as inhibition of FMLP-stimulated intracellular calcium mobilisation after 1 hr by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Antagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assayAntagonist activity at human FPR1 in human neutrophils assessed as inhibition of fMLF-stimulated intracellular calcium mobilisation by FLIPR assay
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Intrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLFIntrinsic activity at FPR1 in human neutrophils assessed as increase in calcium mobilization by FLIPR assay relative to fMLF
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysisAntagonist activity against human FPR1 expressed in human HL-60 cells assessed as inhibition of fMLF-induced calcium mobilization preincubated for 10 mins followed by fMLF addition and measured every 5s for 240s by Fluo4AM dye based scanning fluorimetric analysis
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometryAntagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometry
Antagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometryAntagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometry
Antagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometryAntagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometry
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometryAntagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometry
Antagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometryAntagonist activity at FPR1 in human neutrophils assessed as AB/fMLF-stimulated upregulation of CD11b expression preincubated for 30 mins before AB/FMLF challenge measured after 50 mins using FITC staining by flow cytometry
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
Antagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 methodAntagonist activity at formyl peptide receptor in human HL60 cells assessed as inhibition of intracellular calcium mobilization incubated for 5 mins prior to fMLP challenge by Fura-2 method
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Agonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assayAgonist activity at human FPR1 expressed in CHO cells assessed as increase in calcium flux incubated for 50 mins by FLIPR calcium 5 dye based fluorescence assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assayAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assay
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assayAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at mouse FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO-A12 cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.Measuring Agonistic Activity of Compounds in hFPR1-Gα15-CHO and hFPR2-Aq-CHO Cell: Cryo-vial containing 6×106 cells (hFPR1-Gα15-CHO or hFPR2-Aq-CHO) was thawed in a 37° C. water bath. Cells were suspended in 10 ml of respective complete growth media (F12(1×) HAM media (Gibco; Cat#11765); 10% HI-FBS (Gibco; Cat#10082); 0.1 mg/ml Hygromycin B (Invitrogen; Cat#10687-010) [for hFPR1 only]; 0.2 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR1 only]; 0.4 mg/ml Geneticin (Gibco; Cat#10131) [for hFPR2-Aq only]; 0.25 mg/ml Zeocin (Invitrogen; Cat#R25001) [for hFPR2-Aq only]) in a 15 ml centrifuge tube. The cell viability was checked with the help of Trypan Blue dye. Upon washing the cells, those were plated in a 384-well sterile clear bottom black plate (Greiner Bioone Cat#781091) so that, each well contained 10,000 cells in 40 μl complete growth media. The plate was incubated in a 5% CO2 incubator at 37° C. for 18 hours.Before assay on the next day, the cell plating media was removed from each well of the plate by decanting and gentle tapping. 30 μl, 0.11 of 0.5× Calcium 5 dye solution (0.5×FLIPR Calcium 5 dye (Molecular devices Cat# R8186); HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.025% Pluronic F-127 (Sigma; Cat#P2443); pH adjusted to 7.4) was added to each well. The plate was then incubated at 37° C. for 30 minutes. Following which the plate was equilibrated at room temperature for 10 minutes before placing it in a 384 well FLIPR for assay. Compounds were dissolved in DMSO and serially diluted following 11 point half log (3.16 fold) dilution with a starting concentration of 2 mM (Final assay concentration 10 μM). Aliquots of above mentioned each dilution was mixed with assay buffer (HBSS (Invitrogen; Cat#14025); 20 mM HEPES (Sigma; Cat#H0887); 2.5 mM Probenecid (Sigma; Cat#P8761); 0.05% gelatin (Sigma; Cat#G1890); 0.1% BSA (Sigma; Cat#A3059); pH adjusted to 7.4) just before performing the assay. Compounds were added to the respective wells of the assay ready cell plate with the help of the FLIPR (FLIPR Tetra) and fluorescence readings were captured for 5 minutes to measure any agonistic response of the compounds. The increase in fluorescence readings from the basal reading in presence of the compounds were compared with that of the control wells (wells having no compound) to calculate the agonistic activity of the compounds. The EC50 values of the compounds were determined using the Graph pad Prism software.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysisAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based fluorometer analysis
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as ERK1/2 phosphorylation incubated for 1 hr by Alphascreen fluorescence assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Agonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assayAgonist activity at human recombinant FPR1 stably transfected in Flp-In-CHO cells assessed as increase in intracellular calcium mobilization incubated for 1 hr by Fluo-4 AM dye based fluorescence plate reader assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assayAgonist activity at human FPR1 expressed in CHO cells assessed as cAMP level incubated for 1.5 hr by HTRF assay
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assayAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assay
Agonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assayAgonist activity at human FPR1 transfected in HL-60 cells assessed as increase in intracellular calcium flux incubated for 30 mins by Fluo-4 AM dye based FLIPR-fluorometeric assay
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 1.7 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.Biological Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 fluorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
Biased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assayBiased agonist activity at human FPR1 expressed in FlpIn-CHO cells assessed as stimulation of ERK1/2 phosphorylation measured after 7 mins by Alphascreen assay
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays: A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm. A calibration curve was constructed with an external cAMP standard at concentrations ranging from 1 μM to 0.1 pM by plotting the fluorescent intensity ratio from 665 nm emission to the intensity from the 590 nm emission against cAMP concentrations. The potency and activity of a compound to inhibit cAMP production was then determined by fitting to a 4-parametric logistic equation from a plot of cAMP level versus compound concentrations.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.cAMP Assay: FPR2 and FPR1 Cyclic Adenosine Monophosphate (cAMP) Assays. A mixture of forskolin (5 μM final for FPR2 or 10 μM final for FPR1) and IBMX (200 μM final) were added to 384-well Proxiplates (Perkin-Elmer) pre-dotted with test compounds in DMSO (1% final) at final concentrations in the range of 0.020 nM to 100 μM. Chinese Hamster Ovary cells (CHO) overexpressing human FPR1 or human FPR2 receptors were cultured in F-12 (Ham's) medium supplemented with 10% qualified FBS, 250 μg/ml zeocin and 300 μg/ml hygromycin (Life Technologies). Reactions were initiated by adding 2,000 human FPR2 cells per well or 4,000 human FPR1 cells per well in Dulbecco's PBS (with calcium and magnesium) (Life Technologies) supplemented with 0.1% BSA (Perkin-Elmer). The reaction mixtures were incubated for 30 min at room temperature. The level of intracellular cAMP was determined using the HTRF HiRange cAMP assay reagent kit (Cisbio) according to manufacturer's instruction. Solutions of cryptate conjugated anti-cAMP and d2 flurorophore-labelled cAMP were made in a supplied lysis buffer separately. Upon completion of the reaction, the cells were lysed with equal volume of the d2-cAMP solution and anti-cAMP solution. After a 1-h room temperature incubation, time-resolved fluorescence intensity was measured using the Envision (Perkin-Elmer) at 400 nm excitation and dual emission at 590 nm and 665 nm.
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric methodAgonist activity at human FPR1 expressed in HEK 293 cells co-expressing Galpha15 measured every 1.5 sec for 80 sec by Fluo-4 NW staining based scanning fluorometric method
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Agonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assayAgonist activity at FPR1 (unknown origin) expressed in CHO/Galpha16 cells assessed as increase in calcium flux by FLIPR assay
Displacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation countingDisplacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation counting
Displacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation countingDisplacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation counting
Displacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation countingDisplacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation counting
Antagonist activity at human Gi/o-coupled FPR1 expressed in CHOK1 cells assessed as reduction in WKYMVm-NH2-induced beta-arrestin 2 recruitment incubated for 30 mins followed by WKYMVm-NH2 addition and measured after 90 or 180 mins by pathhunter beta-arrestin assayAntagonist activity at human Gi/o-coupled FPR1 expressed in CHOK1 cells assessed as reduction in WKYMVm-NH2-induced beta-arrestin 2 recruitment incubated for 30 mins followed by WKYMVm-NH2 addition and measured after 90 or 180 mins by pathhunter beta-arrestin assay
Antagonist activity at human Gi/o-coupled FPR1 expressed in CHOK1 cells assessed as reduction in WKYMVm-NH2-induced beta-arrestin 2 recruitment incubated for 30 mins followed by WKYMVm-NH2 addition and measured after 90 or 180 mins by pathhunter beta-arrestin assayAntagonist activity at human Gi/o-coupled FPR1 expressed in CHOK1 cells assessed as reduction in WKYMVm-NH2-induced beta-arrestin 2 recruitment incubated for 30 mins followed by WKYMVm-NH2 addition and measured after 90 or 180 mins by pathhunter beta-arrestin assay
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assayInhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assay
Inhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assayInhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assay
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Displacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation countingDisplacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation counting
Displacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation countingDisplacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation counting
Displacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation countingDisplacement of [3H]fMLF from human FPR1 expressed in CHO cells by scintillation counting
Inhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assayInhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assay
Inhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assayInhibition of human FPR expressed in human U-937 cells by fluorescence based ligand binding assay
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Inhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cellsInhibitory activity against human formylpeptide receptor (FPR) of human leukemia HL-60 cells
Binding affinity to mouse FPR1 expressed in CHO cells assessed as dissociation constantBinding affinity to mouse FPR1 expressed in CHO cells assessed as dissociation constant